Saniflo 049 Sanicubic 1 VX Heavy Duty Simplex Vortex Pump 1.5 HP

The Sanicubic 1 VX is a 1.5 HP heavy duty simplex Vortex system used to pump away waste water from several bathrooms and fixtures from an entire building structure. This system is able to discharge the waste up to 36 feet vertical using a 2" diameter pipe or up to 20 feet when discharging through a 4" pipe. It incorporates a Vortex system which is ideal for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices, warehouses, etc). The Sanicubic 1 VX is designed to handle sanitary products that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc. as well as large diameter solids

This system consists of a 1.5-HP motor housed inside a compact but highly durable plastic enclosure. Incorporates a vortex impeller capable of handling up to 2" solids.

The Sanicubic 1 VX operation is as simple as the installation. The effluent enters the pump through one of three different inlets – one on either side of the unit at the bottom and one on top. The inlets can accommodate 1-1/2” or 4” diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through either a 2" or 4" diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft (2'') or 20 ft (4'') vertically and/or 328 Ft horizontally (2") or 1640 Ft horizontally (4").

The inside of the Sanicubic 1 VX comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, a powerful motor, which drive the Vortex impeller and the pump. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller. The moving parts therefore are kept to an absolute minimum.

The pump is able to handle up to 125 GPM (2'') or 137 GPM (4''). If the incoming rate is higher than the discharge rate, the pump automatically signals the “alarm” stage. This will activate the visual alarm on the pump’s external control panel and the audible alarm from the wired control box (if connected).

• Dimensions (Height x Width x Depth): 19-7/8" x 27-5/8" x 21-5/8"
• Weight : 68 lbs.
• Inlets (in) : 1 1/2'' (side) 4" (top)
• Power supply : 240 V - 60 Hz
• Noise level (measured at 3 ft.) : ≤ 70 dBA
• Horizontal discharge : 328 ft
• Vertical discharge : 36 ft (2") or 20 ft (4")
• Amperage (Amps) : 12 A Max
• Operating maximum temperature : 158 F°
• Discharge pipe diameter : 2" or 4"
• Tank volume : 15.9 gallons
• Method of activation : Pressure switch/circuit board
• Discharge rate at 3 ft : 125 gal/min (473 liters/min) (2") or 137 GPM (518 liters/min) (4'')
• Discharge rate at 36 ft : 26 gal/min (98 liters/min) (2") or 90 GPM (340 liters/min) (4'')
• Motor : 1 HP oil-filled thermally protected motor
• Capacitor rating (microfarad) : 30
• Power cord length (in) : 98
• Shut off head (ft) : 43
• Normal running time : Depends on number of fixtures
• Toilet, Shower/bathtub base min height (in) : 11